Rocstor ARCTICROC 4T Bedienungsanleitung PDF herunterladen (Seite 21)

ARCTICROC 4T – 4Bay RAID System - User Manual Page | 21

RAID 0 (Striping)

RAID 0 (Striping) is a performance-oriented, non-redundant data mapping technique. It

combines multiple hard drives into a single logical unit. Instead of seeing several different hard

drives, the operating system sees only one large drive. Striping splits data evenly across two or

more disks simultaneously, dramatically increasing performance.

Striping can be implemented in disks of differing sizes, but the storage space added to the array

by each disk is limited to the size of the smallest disk. Although Striping is an easily

implemented simple configuration, Striping should never be used for mission critical

applications. The speed of operation is excellent in comparison to other RAID modes.

In Striping mode, it is not possible to see the HDDs as more than one unit. If you

choose to insert all 4 HDDs, it will still be viewed as one single storage unit. When you

choose to insert only two HDDs, there is not limitation on the order of HDD insertion or

the slot number.

RAID 0

Disk 1 Disk 2 Disk 3 Disk 4

In Striping mode, if one disk in the RAID System fails, all data in installed disks will be

lost.

When operating under Striping mode, it is not recommended to do HDD Hot Swap. Any

attempt to do so may result in complete loss of all data.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Keine Kommentare

Rocstor ARCTICROC 4T Bedienungsanleitung Seite 21